濟南工程板房熱鍍鋅角鋼有哪些優勢？

來源：http://www.nbcmds.com 日期：2020-04-27 發布人：

濟南工程板房的建造并不像我們?nèi)庋鬯姷哪敲春唵危鼘Σ牧系膽?yīng)用要求非常高，如熱鍍鋅角鋼也叫熱鍍鋅角鋼或熱鍍鋅角鋼。它是將角鋼浸泡在500℃左右的溶鋅溶液后生銹，使角鋼表面附著鋅層，從而起到腐蝕的作用，讓我們看到熱鍍鋅角鋼的優點。
　　The construction of Jinan Engineering Plank house is not as simple as we can see with naked eyes. It requires very high application of materials. For example, hot-dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. It is to soak the angle steel in the solution of zinc solution at 500 ℃ and then rust, so that the surface of the angle steel is attached with zinc layer, so as to play a role of corrosion, let us see the advantages of hot-dip galvanized angle steel.

　　1.處理成本低:熱鍍鋅防銹的成本低于其他涂層;

濟南工程板房

　　1. Low treatment cost: the cost of hot-dip galvanizing is lower than other coatings;
　　2.耐久性:熱鍍鋅角鋼具有表面光澤度好、鋅層均勻、不漏鍍、不滴水、附著力強、耐腐蝕性強等特點，在郊區環境中，標準熱鍍鋅防銹厚度可保持50年以上不修;在城市或近海地區，標準的熱鍍鋅防銹涂層可以維持20年而不需要修理;
　　2. Durability: the hot-dip galvanized angle steel has the characteristics of good surface gloss, uniform zinc layer, no missing plating, no dripping, strong adhesion, strong corrosion resistance, etc. in the suburban environment, the standard hot-dip galvanized anti rust thickness can be maintained for more than 50 years without repair; in the urban or offshore area, the standard hot-dip galvanized anti rust coating can be maintained for 20 years without repair;
　　3.可靠性好:鍍鋅層與鋼材是冶金結合，成為鋼材表面的一部分，所以涂層的耐久性可靠;
　　3. Good reliability: zinc coating and steel are metallurgical combination, becoming a part of steel surface, so the durability of coating is more reliable;
　　4.鍍層韌性:鍍鋅層形成一種特殊的冶金結構，這種結構能夠承受運輸和使用時的機械損傷;
　　4. Coating toughness: the galvanized layer forms a special metallurgical structure, which can withstand the mechanical damage during transportation and use;
　　5.防護:每一處均可鍍鋅，即使在凹陷、銳角和藏身之處也能得到充分保護;
　　5. Comprehensive protection: each part can be galvanized, even in the depression, acute angle and hiding place can be fully protected;
　　6.省時省力:鍍鋅工藝比其它涂裝施工方法快，并可避免安裝后的現場涂裝所需時間。
　　6. Time and labor saving: the galvanizing process is faster than other coating construction methods, and the time required for field coating after installation can be avoided.

上一條：濟南彩鋼鋪設后如何檢驗？

下一條：定制工程板房需要參考哪些技術標準?

18765446878

濟南工程板房熱鍍鋅角鋼有哪些優勢？

相關產品

相關文章

18765446878

濟南工程板房熱鍍鋅角鋼有哪些優勢？

相關產品

相關文章

濟南工程板房熱鍍鋅角鋼有哪些優勢？