In the process of multimodal transportation, Jinan movable plank house is affected by many factors, such as lifting, inserting, stacking, etc., as well as turbulence and vibration of land and sea transportation. In order to prevent the cracking of interior decoration materials and their joints, the interior decoration materials should adopt the decoration materials with high transverse and longitudinal bending modulus and certain toughness, instead of the brittle materials, such as tile facing and stone facing. The joints of the interior decorative board shall be treated by slotting or laminating. If seamless treatment is required, the operation shall be carried out in strict accordance with the joint embedding process, and the joint adhesive and tape with high self-adhesive capacity, high strength, certain toughness and good construction performance shall be selected.

　　當需要將重物固定或懸掛在集裝箱活動室的墻壁或天花板上時，應事先將內襯板嵌入箱內。

　　When it is necessary to fix or hang heavy objects on the walls or ceiling of the container mobile room, the inner liner plate shall be embedded into the container in advance.

　　保溫設計應保證內表面不露珠，即內表面溫度不低于室內空氣露點溫度。露水會使信封內表面潮濕、發(fā)霉，甚滴水，使室內衛(wèi)生狀況惡化。集裝箱移動式房屋保溫圍護結構的露點為靠近外墻內表面有結構冷(熱)橋的部分。由于室內外溫差大，經常出現露點現象。

　　The insulation design shall ensure that the internal surface is free of dew, that is, the temperature of the internal surface shall not be lower than the indoor air dew point temperature. Dew will make the inner surface of the envelope moist, moldy, and even dripping, which will worsen the indoor sanitation. The dew point of the thermal insulation enclosure structure of the container mobile house is the part close to the inner surface of the outer wall with the structure cold (hot) bridge. Because of the large indoor and outdoor temperature difference, dew point often occurs.

　　以上是濟南活動板房設計的主要內容，想要了解更多內容，歡迎訪問網站：http://www.nbcmds.com

　　The above is the main content of Jinan activity board house design. To learn more, please visit the website: http://www.nbcmds.com