We need to know whether a product is good or bad to decide whether to use it or not. So one of the influencing factors is quality. When we want to know a product, we will first understand its quality. Color steel plate is widely used in our life, so its quality is particularly important. Next, we will introduce the correction method after deformation of Jinan color steel plate, as well as the purchasing skills of color steel plate, hoping to help you!

濟南彩鋼

Jinan color steel

濟南彩鋼是指彩色涂層鋼板，是一種有機涂層鋼板。它分為單板、彩鋼復合板、地板承重板等。廣泛應用于大型公共建筑、公共工廠、活動板房和綜合住宅的墻體和屋頂。相信你在使用過程中會遇到彩鋼板的焊接變形。你知道如何解決這個現象嗎?你知道什么采購技巧?讓我們?yōu)榇蠹铱纯聪旅娴臐喜输摪鍙S分享。

Jinan color steel refers to color coated steel plate, which is a kind of organic coating steel plate. It is divided into veneer, color steel composite board, floor bearing plate, etc. It is widely used in walls and roofs of large public buildings, public factories, prefabricated houses and comprehensive houses. I believe that you will encounter the welding deformation of color steel plate in the process of use. Do you know how to solve this phenomenon? What purchasing skills do you know? Let's take a look at Jinan color steel plate factory to share.

一、糾正變形的方法

1、 Methods of correcting deformation

彩鋼板變形的校正方法可分為兩種：冷加工和熱加工。冷加工法，又稱機器矯正法，是利用機器的力量來矯正彩鋼板的變形。

There are two methods to correct the deformation of color steel plate: cold working and hot working. Cold working method, also known as machine correction method, is the use of machine power to correct the deformation of color steel plate.

另一種方法是熱加工法，也叫火焰矯正法。它利用火焰溫度來加熱彩鋼板面，當它冷卻時，會出現新的單側變形，從而舊的變形，達到矯正的目的。溫度和冷卻時間可以很好地校正功效。加熱溫度越高，校正能力越大。

Another method is hot working method, also known as flame correction method. It uses the flame temperature to heat the color steel plate. When it cools, new one-sided deformation will appear, thus eliminating the old deformation and achieving the purpose of correction. Temperature and cooling time can be used to correct the effect. The higher the heating temperature, the greater the correction ability.

二、購買技巧

2、 Buying skills

1.觀察濟南彩鋼板的外露鋼材，如橫截面，是否有細小結晶、灰色、深色和雜質。一般來說，晶體較細的截面質量較好。

1. Observe the exposed steel of Jinan color steel plate, such as the cross section, whether there are fine crystal, gray, dark color and impurities. Generally speaking, the quality of the section with finer crystal is better.

2.觀察彩鋼板涂層或涂層與基體的厚度，涂層基本上只有0.02 ~ 0.03毫米，涂層厚度往往小于0.15毫米。劣質彩鋼板經常在鋼基體和彩鋼板涂層或涂層上作弊，通常會減少鋼基體的厚度，但會在鋼基體上噴涂更多的涂層或使用很厚的涂層。甚市場上的一些彩鋼板只有0.15毫米的鋼基體和0.4毫米的涂層。

2. Observing the thickness of coating or coating and substrate, the coating is basically only 0.02 ~ 0.03 mm, and the coating thickness is often less than 0.15 mm. The low quality color steel plate often cheats on the steel substrate and the coating or coating of the color steel plate, which usually reduces the thickness of the steel substrate, but it will spray more coating on the steel substrate or use a very thick coating. Even some color steel plates on the market have only 0.15 mm steel substrate and 0.4 mm coating.

3.用手指敲擊彩鋼板。材質較好的彩鋼板聲音明顯清脆，而金屬的聲音不明顯。這是區分彩色鋼板質量的重要標準之一。

3. Tap the color steel plate with your fingers. The sound of color steel plate with better material is obviously clear and crisp, but the sound of metal is not obvious. This is one of the important standards to distinguish the quality of color steel plate.

濟南彩鋼

Jinan color steel

以上是濟南彩鋼板廠家介紹的方法濟南彩鋼板的內容及矯正變形的采購技巧。我希望以上內容能對大家有所幫助。如果你想了解更多你可以更加關注網站http://www.nbcmds.com，歡迎大家隨時訪問和購買。

The above is the method introduced by Jinan color steel plate manufacturer, the content of Jinan color steel plate and the purchasing skills for correcting deformation. I hope the above can help you. If you want to know more, you can pay more attention to the website http://www.nbcmds.com Welcome to visit and purchase at any time.