建筑行業改變了以磚、瓦、灰、石為主要的建筑材料格局，出現了彩鋼板結構建筑。但也存在著它的不足，比如說彩鋼板，主要問題是：屋頂，鉚釘處、板縫處有滲漏現象，影響到正常使用。那么濟南彩鋼板接縫漏雨了怎么應對？

The construction industry has changed the pattern of building materials mainly consisting of bricks, tiles, ashes and stones, and a color steel plate structure has emerged. However, there are also its shortcomings, such as color steel plate. The main problem is that there is leakage at the roof, rivets and seams, which affects the normal use. How to deal with the leakage of Jinan color steel plate joints?

1、可在縫處兩端涂刷寬60mm陽光2000PA單組份防水膠，縫鄰近20mm不涂。

1. 60mm wide sunshine 2000PA single component waterproof adhesive can be applied at both ends of the joint, and 20mm adjacent to the joint shall not be applied.

2、無紡布，布寬150mm，粘貼在涂陽光2000PA防水膠上面。www.lnksmjg.com

2. The non-woven fabric, with a width of 150mm, is pasted on the sunlight 2000PA waterproof adhesive. www.lnksmjg.com

3、在無紡布或玻璃纖布上涂刷3遍，涂刷時后一遍比前一遍寬50mm，厚度1.8mm左右。后一次涂刷以上一次涂層不粘手為準。

3. The non-woven fabric or glass fiber cloth shall be painted for three times. When painting, the last one shall be 50mm wider and 1.8mm thicker than the previous one. The last coat shall not stick.

鉚釘處漏水維修方法：應用陽光單組份防水膠涂刷4次，厚度大約1.5mm左右，直徑50-60mm左右，下一次涂刷以上一次涂層不粘手為準，并一次比一次涂的直徑大，呈中間厚圓周薄。這樣鉚釘處就不會漏雨了。

Repair method for water leakage at rivet: apply sunlight single component waterproof adhesive for 4 times, with thickness of about 1.5mm and diameter of about 50-60mm. The next time, the previous coating is not sticky, and the diameter of each time is larger than that of the previous one, showing middle thickness and thin circumference. In this way, the rivet will not leak.

在一些細節方面注意一下，彩鋼板一般來說是不會有什么多大問題的，所以彩鋼板在建筑材料中，是個好的建筑材料。您對此有什么好的建議可以來我們網站http://www.nbcmds.com進行咨詢！

Pay attention to some details. Generally speaking, color steel plate is not a big problem, so color steel plate is a good building material among building materials. If you have any good suggestions, please come to our website http://www.nbcmds.com Consult!